ECOPERLA MAESTRO
REVERSE OSMOSIS
GET TO KNOW ECOPERLA MAESTRO
Ecoperla Maestro is a countertop reverse osmosis system with a water heating function to 45, 85 and 100ºC. A model designed for people who treat tap or well water (if it meets drinking water standards) and who do not want or cannot install a filter under the sink. The 3-in-1 filter cartridge contains polypropylene foam, an osmotic membrane and activated carbon, which effectively softens water and improves its organoleptic parameters. The cartridge only needs to be replaced once a year or after filtering 2000 liters.
- No traditional water connection installation
- Multi-purpose 3-in-1 cartridge with osmotic membrane
- Very low water rejection ratio (1 liter to 4 liters of raw water)
- Intuitive interface with touch buttons on the housing
- Pouring water with one button
- Water heating function
- Water filling volume selection function
- Parental lock
- Control of raw water quality and cartridge consumption
- Sustainable management of water waste – zero waste
- Elegant casing with universal design
Ecoperla Maestro filters water continuously, and transfers the resulting reject water to the tap water tank, where it is filtered again. When the tap water in the tank reaches the maximum TDS value (800-1000 ppm), the water quality indicator signals the need to replace it. The lack of need to connect the filter to the installation allows for the collection of reject water and later use, e.g. for watering home flowers.
The designer housing includes a multifunctional 3-in-1 cartridge, a large tank for tap water and a small tank for filtered water. No complicated assembly is required to start using the system immediately. Simply place Ecoperla Maestro on a flat surface and plug it into a power outlet.
The tank (4 l) located at the back of the device can be easily removed and filled with fresh tap water. Each time the water is changed, the system automatically rinses the filter cartridge, which further extends the life of the osmotic membrane. The smaller tank for filtered water (800 ml) is located inside the device and is refilled continuously, also while the user is pouring water.
On the housing at the front of the filter there is an intuitive touch panel, and on it a button for pouring water, a button for programming its temperature and a button for selecting the volume. An additional function is a parental lock, which protects the youngest users from scalding with water.
ECOPERLA MAESTRO COMPONENTS
Ecoperla Maestro contains a multi-purpose 3-in-1 filter cartridge with an osmotic membrane. Raw water is stored in a tank and then purified in the following stages:
- Polypropylene melt-blown – reduces turbidity and effectively stops all mechanical impurities
- Activated carbon – removes chlorine and improves the organoleptic parameters of tap water
- Osmotic membrane – a durable component with a capacity of 75 GPD
Compared to traditional reverse osmosis systems, the water rejection in Ecoperla Maestro is exceptionally low and amounts to just one litre of water per four litres of raw water.
Product presentation
Description of the system in a nutshell. Everything that you would like to know before the purchase of Ecoperla Maestro reverse osmosis.
Data sheet
Practical information and technical data about Ecoperla Maestro reverse osmosis.
User's manual
User manual for Ecoperla Maestro reverse osmosis contains the most important data about the system installation.
